setup PPPOE connection : 設定 PPPOE 連線
"su" to change to root, and do "pppoe-setup"
切換為 root, 執行 /usr/sbin/pppoe-setup
---
Enter your Login Name (default root): 輸入 ADSL 帳號
INTERFACE
Enter the Ethernet interface connected to the PPPoE modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethX, where 'X' is a number.
(default wlan0): 用哪張網卡, 一般有線為 eth0, 無線為wlan0, 可從 ifconfig 看到
Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
Enter the demand value (default no): 請打no 不然會常常自動斷線
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide dynamic DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: 輸入DNS的IP, 像 168.95.1.1
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
Enter the DNS information here: 直接enter
PASSWORD
Please enter your Password: 輸入ADSL 密碼
Please re-enter your Password: 再輸入一次
Please enter 'yes' (three letters, lower-case.) if you want to allow
normal user to start or stop DSL connection (default yes): 輸入 yes
The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
Choose a type of firewall (0-2): 可選用 0
Do you want to start this connection at boot time?
Please enter no or yes (default no): 打yes開機時自動連線, 打no則手動
Accept these settings and adjust configuration files (y/n)? 輸入 y 接收設定
接下來可以執行 /sbin/ifup ppp0 來上網.
如果DNS還是有問題, 請在 NetworkManager 的 Edit Connection 中, IPv4 Setting 選用
Automatic (DHCP) address only, 並輸入 DNS server
沒有留言:
張貼留言