I received the rail which I ordered this week, and start to install the rail on.
Before doing, I think it should be easy with the tool, just drill some holes, and screw them on.
But it is not so easy as I think...
1. the iron patch
2. the patch with the rail
3. measure it and mark the place, then drill the hole
I have three good assistants, the first one is the screw driver
the second is the one I bought from Japan, this one is good, but I found that I forgot to buy the drill bits.
So I just bought the third one from B&Q, Since it is cordless, it is convenient to work. I use it to drill and screw.
But I think the third cordless one is good to drill on the wood, but not on the concrete wall, since it is not so powerful as the second one. So I used the second one to drill and the third one to screw.
4. I installed the first rail quickly after drilled the hole and screwed the iron patch on. But I met problem at the second rail. After drilling the hole, I just found the screw can not be fixed well on the wall. Though it said that the drill bit is 3mm, and the screw is 4mm, it seems the hole is a little bigger. Maybe I used the shaking mode which punches the drill bits once, and it maked the hole bigger. So I went to buy the 5mm screws, and it's lucky that 5mm screw still can go through the hole of the patch, just became tight.
5. Finally, I exhausted all my energy, and made the curtain on.
I slept for several hours. At that time, I dreamed SyouSye and SyouLong.
I put them into the wood boxes and put the cover, and they pushed the cover and jumped out to ask me to play. It's a long time I didn't play with them all. I think I miss them too much...
It's a good experience to do this. For the other curtain at another room, I'm still thinking to ask some expert to do it, or do it by myself again..
Day time:
Night:
